BK Precision Clearance Model MDL002 - Programmable DC Electronic Load Mainframe Extension
The MDL Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
Transient mode up to 25 kHz
Synchronous Load on/off function
Adjustable slew rate in CC mode
Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
Short circuit test
Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
Remote voltage sensing to compensate for the effect of voltage drop in wires
Operate identical modules in parallel mode for high current applications
OVP/OCP/OPP/OTP and reverse voltage protection
Mainframe Mainframe Extension Modules
| Model | MDL001 | MDL002 | MDL200 | MDL252* | MDL302* | MDL305 | MDL400 | MDL505 | MDL600
| Power | up to 2400 W total | up to 2400 W total | 200 W | 250 W/50 W | 300 W/300 W | 300 W | 400 W | 500 W | 600 W
| Voltage | n/a | n/a | 80 V | 80 V | 80 V | 500 V | 80 V | 500 V | 80 V
| Current | n/a | n/a | 40 A | 20 A | 45 A | 20 A | 60 A | 30 A | 120 A
| Inputs | n/a | n/a | 1 | 2 | 2 | 1 | 1 | 1 | 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).
Clearance Units
Instruments that are new (unopened) and are at the end of their product life cycle.
The MDL Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
Transient mode up to 25 kHz
Synchronous Load on/off function
Adjustable slew rate in CC mode
Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
Short circuit test
Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
Remote voltage sensing to compensate for the effect of voltage drop in wires
Operate identical modules in parallel mode for high current applications
OVP/OCP/OPP/OTP and reverse voltage protection
Mainframe Mainframe Extension Modules
| Model | MDL001 | MDL002 | MDL200 | MDL252* | MDL302* | MDL305 | MDL400 | MDL505 | MDL600
| Power | up to 2400 W total | up to 2400 W total | 200 W | 250 W/50 W | 300 W/300 W | 300 W | 400 W | 500 W | 600 W
| Voltage | n/a | n/a | 80 V | 80 V | 80 V | 500 V | 80 V | 500 V | 80 V
| Current | n/a | n/a | 40 A | 20 A | 45 A | 20 A | 60 A | 30 A | 120 A
| Inputs | n/a | n/a | 1 | 2 | 2 | 1 | 1 | 1 | 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).
Clearance Units
Instruments that are new (unopened) and are at the end of their product life cycle.
The MDL Series is a multi-channel modular programmable electronic load system. Seven different modules of programmable DC loads ranging in power from 200 W to 600 W provide users the flexibility to test a wide range of power sources from multi-output DC power supplies to batteries, fuel cells, and photovoltaic arrays.
The mainframe has four slots that can be configured with any assortment of the modules up to 2400 W (up to 4800 W with mainframe extension). The high-performance electronic load modules of the MDL Series are capable of operating in constant current (CC), constant voltage (CV), constant resistance (CR), constant power (CW), and constant impedance (CZ) mode, which uses DSP technology to simulate non-linear loads and realistic loading behavior.
Modules offer wide voltage and current range, 0 to 500 V, 0 to 120 A
Support for up to 4 modules/8 channels or 8 modules/16 channels with mainframe extension
Transient mode up to 25 kHz
Synchronous Load on/off function
Adjustable slew rate in CC mode
Standard LAN, GPIB, USB, and RS-232 interfaces with USBTMC/SCPI protocol support
Short circuit test
Built-in 16-bit resolution voltage and current measurement (0.1 mV, 0.01 mA)
Remote voltage sensing to compensate for the effect of voltage drop in wires
Operate identical modules in parallel mode for high current applications
OVP/OCP/OPP/OTP and reverse voltage protection
Mainframe Mainframe Extension Modules
| Model | MDL001 | MDL002 | MDL200 | MDL252* | MDL302* | MDL305 | MDL400 | MDL505 | MDL600
| Power | up to 2400 W total | up to 2400 W total | 200 W | 250 W/50 W | 300 W/300 W | 300 W | 400 W | 500 W | 600 W
| Voltage | n/a | n/a | 80 V | 80 V | 80 V | 500 V | 80 V | 500 V | 80 V
| Current | n/a | n/a | 40 A | 20 A | 45 A | 20 A | 60 A | 30 A | 120 A
| Inputs | n/a | n/a | 1 | 2 | 2 | 1 | 1 | 1 | 1
*The MDL252 and MDL302 are dual-channel modules. MDL252 users can allocate 250 W to either channel up to 300 W total (e.g. 50 W/250 W, 250 W/50 W, 150 W/150 W). MDL302 users can allocate 300 W to either channel up to 600 W total (e.g. 300 W/300 W).
Clearance Units
Instruments that are new (unopened) and are at the end of their product life cycle.